- 1 GT Tip Assembly
- 1 Lever
- 1 Pin
- 2 Screws
- 3 Springs
- Phillips Screwdriver or Drill
- Flat Screwdriver
- Small Punch
STEP 1 Use a phillips screwdriver (or a drill with a phillips-head bit) to remove the 2 screws attaching the GT tip to the inner pole.
STEP 2 Pull the original GT tip to remove it from the inner pole.
STEP 3 Place the replacement GT tip in the inner pole and align the screw holes.
STEP 4 Use the new screws to secure the replacement GT tip to the pole.
STEP 5 Use a hammer and a small punch to gently push the pin from the lever mechanism. Remove the lever mechanism and the spring.
STEP 6 Place the new lever into position.
STEP 7 Insert the replacement pin and lightly tap it into place with a hammer.
STEP 8 Use a flat screwdriver to push a new spring into place.